|
Select Page

Ecoroll

About

Milford, Ohio, USA is HQ of ECOROLL Corporation, the subsidiary company founded in 2004. This suburb of the metropolis Cincinnati is located in the immediate vicinity of many companies in which ECOROLL tools and machines could be deployed to full advantage. To be locally present is crucial in order to provide American as well as German customers in USA the kind of service they require.

The strongest industries in the Mid-West not only include machine and systems engineering and the automotive industry but aerospace too. In the automotive industry for example crankshafts are deep rolled; in the aerospace industry aircraft wheel rims and engine components machined with ECOROLL tools.

ECOROLL Corporation makes fast deliveries possible and reinforces the service provided to American customers. In this way ECOROLL solutions can be developed specifically for individual customers, machines and work pieces.

ecoroll-logo

Processes

Similarities and Differences

The technology developed at ECOROLL AG can be applied across a broad spectrum of industries, including engineering, medical technology, automotive industry, aircraft and aerospace, energy industry and anywhere metal parts must be improved to increase fatigue strength and service life or to facilitate better function. Roller burnishing and deep rolling tools are compatible with almost every tool machine (e.g. conventional and CNC-controlled lathes, drills, milling machines, and other machine centers). Thus, a work piece can be burnished or deep rolled in one setting directly after machining. For certain cases, where complex tool machines are involved, a separate deep rolling machine can be offered for use in parallel during machining.

For both processes different process kinematics are possible. The easiest variant is plunging (Fig. 1). Here, a roller or ball is pressed against the surface of a workpiece in at an axial position. The burnishing force is built up during several rotations and kept at level during the following rotations. At the end of this process the burnishing force is reduced during the final rotations. This procedure is necessary to prevent stress gradients in the surface layer of a component which could lead to its early failure. This kinematic is primarily used for deep rolling to eliminate, for example, notch effects on wavelike components.

The second variant, feeding, is used for easy and quick machining of, for example, cylindrical surfaces (Fig. 2).

Tools with a hydrostatically loaded ball can roller burnish and deep roll even the most complex contours and free-form surfaces (Fig. 3). Its unique following system enables the burnishing ball to follow the workpiece contour while maintaining a constant burnishing force. For safety-relevant components where a constant process quality is indispensable, only force-controlled tools can be used for roller burnishing and deep rolling.

Moreover, hydrostatic tools can process materials up to a hardness of 65 HRC (hardness Rockwell C). Even then, smoothing, cold work and induction of residual compressive stresses in the component’s surface layer are achieved.

The main difference between deep rolling and roller burnishing is the goal setting. When the application goal is to improve surface finish (i.e. to achieve a specific roughness), roller burnishing is the choice. The main objective of deep rolling is increasing fatigue strength of a component. This improvement of its operating life is mainly based upon strain hardening and the induction of residual compressive stresses in its rim zone. However, the simultaneous improvement of other surface qualities is, of course, beneficial but not as important in deep rolling.

Furthermore, quality management is different for both processes. For roller burnishing a simple measurement of finish quality is required. If a pre-defined parameter is not achieved, the burnishing process can be repeated.

When it comes to deep rolling, more complex procedures are needed, such as durability tests or residual stress measurements, which lead to a destruction of the component. For quality assurance during deep rolling a reliable reproduction of pre-defined and approved parameters is necessary. Especially, where safety-relevant components are concerned process monitoring and documentation during operation is indispensable.

Fig. 1: Rolling in cut-in
Fig. 2: Rolling in feed motion
Fig. 3: 3-D rolling of free-form surfaces
ecoroll-repair

Repair & Install

Ecoroll offers a comprehensive service for installation, commissioning and repair of all tools and equipment.

Gallery

Unlock great offers! don’t miss out and follow us onecoroll-fb