FROMM Adjustable Hand Reamer Righthand Cutting with Adjustable Blades, Straight Shank with Square
Right-hand cutting reamer with adjustable blades, straight shank with square. Blades are eccentrically vault-ground.
Especially suitable for reaming short holes meeting normal precision requests. For example: repair works. For diameters ranging between 8 - 65 mm, only 15 pieces reamers are required. The blades are additionally hard-chromed for the hard-chrome version. Hard-chromed reamers are characterized by being particularly hard whilst at the same time having low friction levels. These reamers are especially suitable for reaming materials with high-wear effciency and also for materials with a tendency to bond and form build-up edges.
"IMPORTANT: Under no circumstances may the reamer be turned in the bore hole against the direction of the cut ! i.e. counter-clockwise. The blades are at risk of becoming blunt and may even break should the reamer be turned in the hole against the direction of the cut. Rapidly-adjustable hand reamers tipped with blades are not roughing tools, but they are suitable for the Þ ne-smoothing of holes. The cutting depth of the reaming process should be between 0.03 "" 0.1 mm, depending upon the diameter and material used. Where the removal of metal is too low, the reamer no longer cuts and only sharpens the hole, and therefore becomes blunt."
Out Of Stock!
This product is out of stock, submit your email and we will update once it restock.