Roscamat Pneumatic Tapping Arm Machine - Series 200
Reach 37” Height 26”
- Tap up to 9/16” (M14)
- Air motor engineered for tapping machine
- Heavy duty cast aluminium construction
- Utilizes size 1 tap adaptors for quick change
Options
- Vertical tapping
- Vertical & horizontal tapping (VH)
- 350 or 750 RPM single speed models
| EDP | Description | Orientation | Speed RPM | Capacity (inch) | Capacity (metric) |
| R20001F | Series 200-350 | Vertical | 350 | #0 - 9/16” | M14 |
| R20002F | Series 200-750 | Vertical | 750 | #0 - 3/8” | M10 |
| R20003F | Series 200-VH-350 | Vertical & Horizontal | 350 | #0 - 9/16” | M14 |
| R20004F | Series 200-VH-750 | Vertical & Horizontal | 750 | #0 - 3/8” | M10 |
Out Of Stock!
This product is out of stock, submit your email and we will update once it restock.
Roscamat 200; Capacity M2-M14 (M16)
This machine consists of a pendular parallelogram that is balanced by a pneumatic spring, plus a radial arm. The gas spring and radial arm assembly fixes the motor head and keeps it perpendicular to the working area. The motor is equipped with a quick-change system and is rotated by compressed air that has previously been filtered and lubricated by a unit for that purpose. Taps and shank tooling fit to the motor's quick-change system by means of tapholders.
Motor
The ROSCAMAT 200 can be equipped with any motor TSVII. Each of them has a different speed, and also a different thread capacity.
| Motor TS-VII | Max. speed (rpm) | Max. torque (Nm) | Coupling diametre | Max. thread Steel <100 Kg | Max. thread Aluminium |
| 202A0100 | 350 | 30 | Ø 19 | M14 | M16 |
| 202B0100 | 750 | 17 | Ø 19 | M10 | M12 |
Roscamat 200 VH
The ROSCAMAT 200 can be supplied with an articulated head. This bracket of easy handling can be set in four different positions 90º apart.
Working areas
Roscamat 200: Radius: 935 mm / High: 530 + 130 mm
Roscamat 200 VH: Radius: 1020 mm / High: 530 + 130 mm
Quick-change Toolholders
A wide range of tapholders, all of them with clutch and without it, apart from other quick holding fixtures for different tools, such as drills, sinking tools, threading dies, socket wrenches, etc are available. · Toolholder with safety clutch: (so that it slips when it reaches the hole bottom) Type-1 Ø 19 capacity range M2-M16 · Toolholder without clutch: (for holding different tools with a cylindrical shank and driving cube) Type-1 Ø 19 capacity range M2-M16
